Brickle
Strip – Double Width Prickle Strip
Product Code: FX006
£3.95 per
strip -1/2 metre
Delivery
The best way to
keep foxes out of your garden is to prevent them getting in in the first place.
The spikes are designed to give maximum discomfort with minimum harm. Based
on the original Prickle Strip design.
Made from weather
resistant polypropylene, Brickle Strip is easily attached to the top of a brick
wall or ledge with glue, nails or screws (see instructions below). Can also
be used on tree branches or sheds. Easy to cut and drill more holes if required.
Comes in strips
50cm (1ft 71/2 inches) long by 10cm wide (3 3/4 inches wide) double the width
of the standard Prickle strips. The cone shaped spikes are also taller at 2.5cm
(1inch) with 4 rows across (80 cones per 50cm strip). The strips are hinged
(see picture below) to allow better fit to curved surfaces.
Manufactured in Terracotta (red brick).
Also a very effective
cat and human intruder deterrent, seen on BBC's 'Beat the burgler'.
Fitting
Instructions:
Many glues and adhesives
will not adhere to polypropylene - use Pink Grip Adhesive or screws / nails
Trimming:
Trim to size using
a suitable saw. Curves and bends can be formed by immersing in very hot water.
Brickle Strip can also be easily cut (using scissors or a knife) to a double
or single row strip using the hinge grooves as a guide.
